Hello guys, I was wondering if anybody had a key for SDVJENM405MAP27.dbv ? I was also thinking , when i clicked on the map area I wanted on the Time Zero website, it gives me first the vector option, which is the chart im looking for a key.. But then there is also "3D" maps there called SDEN01TIN01.dbt and SDNA01TIN01.dbt , are these something I could use and do I need other keys for these maps ? Im using Time Zero 4.2, that should support 3D maps ?
101115Hello guys, I was wondering if anybody had a key for SDVJENM405MAP27.dbv ? I was also thinking , when i clicked on the map area I wanted on the Time Zero website, it gives me first the vector option, which is the chart im looking for a key.. But then there is also "3D" maps there called SDEN01TIN01.dbt and SDNA01TIN01.dbt , are these something I could use and do I need other keys for these maps ? Im using Time Zero 4.2, that should support 3D maps ?
8D1317202EE9257F27D8 Honestly, i dont know how works 3d charts, i have not code for it and some charts say "Unlocked" but i see the same ( in 3d) that if im using vector charts.
Sate, Thank you very much for the key , it's ok i dont really need those 3d maps, i was just curious about them, the vector map is what i will mostly be using anyway :)
Olá amigos, baixei o TZ Professional, fiz o passo a passo da ativação até iniciar o programa, ele está pedindo ativação / login na conta mytimezero.com, as funções de tempo, clorofila da água e vento não funciona alguém poderia me ajudar?
BobbyDigital, I don't know what model of Radar you have. But for the TTM to pass through LAN you have to configure the output. 2XX7 Configuration: The ARPA target output must be setup through the LAN from one FAR2xx7. Hold “HL OFF” and press the “MENU” key 5 times. The “Initialize” menu appears. First, select “TT Preset” (6). Select “True” for “TTM Output” (2). Select “Back” to return to the “Initialize” menu and select “Other” (8). Set “INS” (5) to “LAN”. TimeZero Configuration: In order for the ARPA target to be received over the network, you need to configure it manually in the software: Open the Connection Wizard Select "Manual Port Configuration" and click on "Next" Select "Add/Configure UDP Connection" and click on "Next" Select the IP address that begins with 172.31.x.x from the "Network Adapter" drop down menu and type "10028" for the "UDP Port". Click on "Next" When TimeZero is done analyzing the port, select “UDP 10028” in the list on the left and make sure that “ARPA” is checked in the list on the right. Click "Next" then "Finish".
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
Is for navigator or professional ?
Need code for chart:
SDVJEMM076MAP27
Thanks in advance ????
Need code for chart:
SDVJEMM076MAP27
Thanks in advance ????
I was also thinking , when i clicked on the map area I wanted on the Time Zero website, it gives me first the vector option, which is the chart im looking for a key.. But then there is also "3D" maps there called SDEN01TIN01.dbt and SDNA01TIN01.dbt , are these something I could use and do I need other keys for these maps ? Im using Time Zero 4.2, that should support 3D maps ?
I was also thinking , when i clicked on the map area I wanted on the Time Zero website, it gives me first the vector option, which is the chart im looking for a key.. But then there is also "3D" maps there called SDEN01TIN01.dbt and SDNA01TIN01.dbt , are these something I could use and do I need other keys for these maps ? Im using Time Zero 4.2, that should support 3D maps ?
Honestly, i dont know how works 3d charts, i have not code for it and some charts say "Unlocked" but i see the same ( in 3d) that if im using vector charts.
pls a code for SDVJEMM076MAP27. the above code (76CC5DE992E4AC9B276D) doesnt work. thanks!
also, do you have a code for SDVJEMM111MAP27? thanks in advance!
Pro E3B481D0B6D74B21273D
Nav DE779E078968D46A2786
Good day
Can we use the photo file:
Reference: SDAS03SAT01.dba
Thanks.
Need code for chart:
SDR32P02MAP11.DBR
UC 8A013C4F1C3590EB1021
I don't know what model of Radar you have.
But for the TTM to pass through LAN you have to configure the output.
2XX7 Configuration:
The ARPA target output must be setup through the LAN from one FAR2xx7. Hold “HL OFF” and press the “MENU” key 5 times. The “Initialize” menu appears. First, select “TT Preset” (6). Select “True” for “TTM Output” (2). Select “Back” to return to the “Initialize” menu and select “Other” (8). Set “INS” (5) to “LAN”.
TimeZero Configuration:
In order for the ARPA target to be received over the network, you need to configure it manually in the software:
Open the Connection Wizard
Select "Manual Port Configuration" and click on "Next"
Select "Add/Configure UDP Connection" and click on "Next"
Select the IP address that begins with 172.31.x.x from the "Network Adapter" drop down menu and type "10028" for the "UDP Port". Click on "Next"
When TimeZero is done analyzing the port, select “UDP 10028” in the list on the left and make sure that “ARPA” is checked in the list on the right. Click "Next" then "Finish".
Arpa LAN